YTO LR China-III low-speed engine features low malfunction rate, low noise, and low fuel consumption under composite working condition.
0086-15505367375
YTO LR China-III low-speed engine features low malfunction rate, low noise, and low fuel consumption under composite working condition.
ENGINE | Model | LR4B3-22 |
Rated Power | 57 kW (78 hp) @ 2,200 rpm | |
Displacement | 4.58L | |
Max Torque | 285 N · m | |
Number of Cylinders | 4 | |
LOADER ARM PERFORMANCE | Tipping Load - Full Turn | 4000 kg |
Bucket Breakout Force | 55 kN | |
Maximum Dump Angle at Full Height | 45° | |
Dump Clearance at Full Height Discharge | 2460 mm | |
Dump Reach at Full Height Discharge | 850 mm | |
Maximum Hinge Pin Height | 3170 mm | |
Maximum Digging Depth, Bucket Level | 50 mm | |
Bucket Capacity | 1 m3 | |
Operating Weight | 6200kg | |
TRANSMISSION | Transmission Type | Countershaft, power shift |
Torque Converter | Single stage, three elements | |
Maximum Travel Speed, fwd | 28 km/h | |
Maximum Travel Speed, rev | 24 km/h | |
Number of Speeds, fwd | 4 | |
Number of Speeds, rev | 2 | |
AXLES | Differential Front Type | Conventional |
Differential Rear Type | Conventional | |
Axle Oscillation | ±12° | |
STEERING | Steering Configuration | Articulated |
Steering System Pressure | 12 Mpa | |
BRAKES | Service Brake Type | Caliper disc brake |
Service Brake Actuation | Air over Hydraulic | |
Parking Brake Type | Flexible shaft control | |
Parking Brake Actuation | Mechanical | |
TIRES | Tire Size | 16/70-20 |
HYDRAULIC SYSTEM | Main Pump Type | Gear |
Main Relief Pressure | 16 Mpa | |
Raise time | 4.92 S | |
Total Cycle Time | 8S | |
SERVICE CAPACITY | Fuel Tank | 105 L |
Hydraulic oil Tank | 94 L | |
Engine Oil | 20 L | |
Axles, each | 10X2 L | |
Transmission | 38 L | |
Cooling System | 20 kg | |
DIMENSIONS | Length | 5620 mm |
Width | 2078 mm | |
Height | 2850 mm | |
Wheelbase | 2270 mm | |
Wheel Tread | 1482 mm | |
Ground Clearance | 290 mm | |
Turn Angle, Either Side | 35° | |
Turning Radius, Outside of Tire | 4575 mm | |
Turning Radius, Center of Tire | 4370 mm | |
Turning Radius, Bucket Carry | 5090 mm |
