Power System The installed WP10 electronically controlled engine conforms to the China-III non-road machinery emission regulation, featuring strong power, high efficiency and energy-saving, and low maintenance cost. The rated power reaches 131kW。
SD17-C3 Bulldozer
Specifications
| Engine | |
| Engine | WEICHAI WP10G190E354 |
| Rated revolution | 1900rpm |
| Gross power | 140kW(188hp)@1900rpm |
| Net power | 127kW(170hp)@1900rpm |
| Displacement | 9.726L |
| Max. torque | 920N.m@1300-1500rpm |
| Cooling system | Mechanic fan |
| DRIVE SYSTEM | |
Drive system | Manufactured by SHANTUI, with high working efficiency, low breakdown rate; torqflow transmission, 3 gears forward and 3 gears backward, All steering, direction, and speed changes are made by a left-hand single joystick control. |
Traveling speed | Forward: 0~3.5km/h, 0~6.2km/h, 0~10.6km/h |
| Backward: 0~4.5km/h, 0~8km/h, 0~13.1km/h | |
| Max. theoretical traction force | 170kN |
| Torque converter | 3-element, single stage, 1-phase |
Transmission | Electric control, planetary gear and torqflow transmission hydraulically actuated, forced lubrication |
| Bevel gear shaft | Spiral bevel gear, single-stage speed reduction, splash lubrication |
Steering clutch | Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load |
| Brake | Regular closed multi-disk brake |
| Final drive | Primary spur gear + primary planetary reduction |
| CHASSIS SYSTEM(XL) | |
| Type | Swing type of sprayed beam, suspended structure of equalizer bar |
| Track shoe type | Single grouser |
| Track gauge | 1880mm |
| Width of track shoe | 510mm/560mm/610mm |
| Track grounding length | 2635mm |
| Track grounding area | 29512cm² |
| Number of track shoe | 39pcs/single side |
| Grounding pressure (standard configuration) | 59kPa |
| Number of carrier roller | 2 pcs/single side |
| Number of track roller | 7pcs/side |
| Pitch | 203mm |
| VOLUME | |
| Fuel capacity | 338L |
| Coolant liquid capacity | 56L |
| Engine oil capacity | 24L |
| Hydraulic oil tank | 70L |
| Transmission | 52L |
| Drive axle | 70L |
| Final drive | 21L/single side |
| OPERATING WEIGHT（XL） | |
| Operating weight (standard) | 17500kg |
| BLADE（XL） | |
| Blade type | Straight-tilt blade |
| Blade capacity | 3.3m³ |
| DIMENSION(XL) | |
| Machine height (without ROPS) | 3128mm |
| Track grouser height | 65mm |
| Ground clearance | 400mm |
| Machine length (without draw bar) | 5140mm |
| Max. lifting height of blade | 1010mm |
| Max. digging depth of blade | 540mm |
| Digging angle of blade | 55°±3°(deg.) |
| Blade width | 3455mm Straight-tilt blade |
| Blade height | 1149mm Straight-tilt blade |
| Width from end of left track shoe to end of right track shoe (standard) | 2390mm |
| PARAMETER OF RIPPER (Three-shank ripper: 1631kg) | |
| Max. ripping depth | 572mm |
| Max. lifting height | 592mm |
| Ripper length (at deepest ripping) | 1580mm |
| Ripper width | 2080mm |
| Departure angle (at highest lifting) | 32.1° |
| Ripping width | 1900mm |
| Distance between ripper teeth | 950mm |
